No edit summary
No edit summary
 
(62 intermediate revisions by the same user not shown)
Line 1: Line 1:
Zone:
[[Category:Lasers]]
[[Category:Lasers]]
[[File:SP500.jpg|frameless|right]]This is our most versatile laser laser. It's excellent for cutting wood up to <Y> inch thick. This can also handle cast acrylic sheets, EVA foam, plywood, wood, and many other materials safely!
{| class="wikitable"
|+Equipment Specifications
!Power (watts)
|120
|-
|'''Wavelength'''
|10.6 µm
|-
|'''Working area'''
|1245 x 710 mm (49 x 28 in)
|-
|'''Loading Area'''
|1420 x 820 mm (56 x 32 in)
|-
|'''Max Load'''
|40 lbs, even load over the whole working area
|-
|'''Power Draw'''
|Max. 5.6 kW
|}
=== Trainers ===
* See '''Ryan''' for training.
=== Getting Help ===
* The Trainers will answer questions on the operation of the laser cutter.
* If you have a concern, just ask, it's cheaper then replacing equipment!
* Design help not actually included, but sometimes we know and can help!
=== Safety Rules ===
* [[Laser Approved Material|Only attempt these materials]] or '''PLEASE''' ask prior to using new stuff.
* Keep area clear of debris, cutoff pieces and other hazards.
* Take your time. Accidents happen because someone is in too big of a hurry.
* Think about what you are doing. If something seems unsafe, it probably is. If there is any flame it's always unsafe!
* If you see flames between the lens and your work, stop the equipment until you can isolate the issue.
* If your work is catching on fire, melting, or similar stop the equipment until you can isolate the issue.
* Leave the space as clean as you found it. If you find it in a messy state, please contact Ryan or Zack describing the mess, date, and time, and then please be extra awesome and clean up after those before you.
== Operating Procedures ==


=== Startup ===


== Welcome ==
==== Cold Start (Rare) ====
Welcome to the Laser Zone! This zone is solely for the laser cutter.


== Training ==
# x
* When Authorized to use tools, it means you have been authorized by a trainer to use the laser. Authorization refers to the unique things that are required of a user at KMS, one knows how to use the tool, maintain it, where parts and tools unique to the tool are kept, and the proper condition to leave it in.
* Full Access allows operators to utilize the equipment without supervision.
* Limited Access allows operators to utilize the equipment once the project setup has been verified.


=== Office Hours ===
==== Warm Start ====
* 2nd and 4th Mondays of the Month at 6:00 pm to 8:00 pm.


=== List of Trainers ===
# x
* See list at the bottom of the page.


=== Getting Help ===
=== Shutting Down ===
* The Trainers will answer questions on the operation of the laser cutter.
#x
* Designing work is not included. If you need help with your design, there will be an additional charge set by the person helping.
##
 
=== Common Troubleshooting ===


== Safety Rules ==
===== Problem 1: Laser keypad controls stop working, fan stops running =====
* Keep area clear of debris, cutoff pieces and other hazards.
* Take your time. Accidents happen because someone is in too big of a hurry.
* Think about what you are doing. If something seems unsafe, it probably is.
* Leave the space as clean as you found it. If you find it in a messy state, please send the coordinator an email describing the mess, date, and time, and then please be extra awesome and clean up after those before you.


== Table of Equipment ==
====== Solution 1: Hit the power icon face on the laser keypad controls to wake the machine up. ======
[[RuiDa 80W CO2 Laser]]


== Table of Tools ==
The machine goes into a power save mode when inactive.


== Projects and Material Storage ==
===== Problem 1: Lost connection with laser =====
There is currently no place for over night or long term storage in this zone. All project must be taken home at the end of the day.
=== Trash ===
*Place small trash into trash bins.
*Place large wooden trash into the waste bid near the table saw in the wood shop.
*Place all other large items near one of the trash bins.


== Other References ==
====== Solution 1: Log out of the computer user, and log back in again ======
=== FAQ ===
Q: Is there anything cooler than cutting stuff with a laser?


A: Nope.
You'll need to log out, or reboot Windows and log back in again and restart the software.


=== Useful Sites ===
== Manuals and Documents ==
*[http://www.chymist.com/Polymer%20Identification.pdf burn test]
*[http://www.atxhackerspace.org/wiki/Laser_Cutter_Materials atxhackerspace notes]


== To-Do List ==
* [https://www.troteclaser.com/static/pdf/sp500/Technical_Datasheet_SP500_en.pdf Technical Datasheet]
*Booking system for reservations and billing for time.
*Add machine timer to the machine.
*Move the laser to a quieter spot.
*Find a permanent zone leader.
*Find and train more mentors.
*Create monthly activities or workshops for the laser.


== Wish List ==
*
More lasers cutters


More powerful lasers cutters
== Computer Software ==


== Billing ==
* [[Guides/Ruby|Trotec Ruby]]
*[https://docs.google.com/spreadsheets/d/177JuvKQkm3w3got24tABRfr_RMALy3bxIVey8ztvuBU/edit?usp=sharing Link to billing Database]


== Authorized Users ==
*
{| class="wikitable"
!User Name
!Certified Date
|-
|Daniel Wilkins
|12/1/2016
|}


{| class="wikitable"
*
!colspan="4"|Access Level 80W laser Cutter
|-
!User Name
!Authorized By
!Level
!Date Last Trained
|-
|Xavier Wilkins
|Daniel Wilkins
|Full Access
|3/12/2018
|-
|Chris Czarnik
|Daniel Wilkins
|Full Access
|3/12/2018
|-
|Andrew Beem
|Daniel Wilkins
|Full Access
|3/12/2018
|-
|Kevin Hayden
|Daniel Wilkins
|Full Access
|3/12/2018
|-
|Austin Garvelink
|Daniel Wilkins
|Full Access
|3/12/2018
|-
|Jon Stibal
|Daniel Wilkins
|Full Access
|3/12/2018
|-
|Stacy Belinsky
|Daniel Wilkins
|Limited
|3/12/2018
|-
|Ariel Tavori
|Daniel Wilkins
|Limited
|3/12/2018
|-
|Scott Cleveland
|Daniel Wilkins
|Limited
|3/15/2018
|-
|Colleen Woolpert
|Daniel Wilkins
|Limited
|3/15/2018
|-
|Don Batts
|Daniel Wilkins
|Limited
|4/23/2018
|-
|Don Smith
|Daniel Wilkins
|Limited
|4/23/2018
|-
|Christopher Miller
|Daniel Wilkins
|Limited
|4/23/2018
|-
|Ron Schubot
|Daniel Wilkins
|Limited
|4/23/2018
|-
|Tanner Patch
|Daniel Wilkins
|Limited
|5/10/2018
|-
|Zach Schira
|Daniel Wilkins
|Limited
|6/12/2018
|-
|Richard Kent
|Daniel Wilkins
|Limited
|6/25/2018
|}

Latest revision as of 03:53, 15 May 2023

SP500.jpg

This is our most versatile laser laser. It's excellent for cutting wood up to <Y> inch thick. This can also handle cast acrylic sheets, EVA foam, plywood, wood, and many other materials safely!

Equipment Specifications
Power (watts) 120
Wavelength 10.6 µm
Working area 1245 x 710 mm (49 x 28 in)
Loading Area 1420 x 820 mm (56 x 32 in)
Max Load 40 lbs, even load over the whole working area
Power Draw Max. 5.6 kW

Trainers

  • See Ryan for training.

Getting Help

  • The Trainers will answer questions on the operation of the laser cutter.
  • If you have a concern, just ask, it's cheaper then replacing equipment!
  • Design help not actually included, but sometimes we know and can help!

Safety Rules

  • Only attempt these materials or PLEASE ask prior to using new stuff.
  • Keep area clear of debris, cutoff pieces and other hazards.
  • Take your time. Accidents happen because someone is in too big of a hurry.
  • Think about what you are doing. If something seems unsafe, it probably is. If there is any flame it's always unsafe!
  • If you see flames between the lens and your work, stop the equipment until you can isolate the issue.
  • If your work is catching on fire, melting, or similar stop the equipment until you can isolate the issue.
  • Leave the space as clean as you found it. If you find it in a messy state, please contact Ryan or Zack describing the mess, date, and time, and then please be extra awesome and clean up after those before you.

Operating Procedures

Startup

Cold Start (Rare)

  1. x

Warm Start

  1. x

Shutting Down

  1. x

Common Troubleshooting

Problem 1: Laser keypad controls stop working, fan stops running
Solution 1: Hit the power icon face on the laser keypad controls to wake the machine up.

The machine goes into a power save mode when inactive.

Problem 1: Lost connection with laser
Solution 1: Log out of the computer user, and log back in again

You'll need to log out, or reboot Windows and log back in again and restart the software.

Manuals and Documents

Computer Software

Retrieved from "http://wiki.kzoomakers.org/index.php?title=Trotec_SP500&oldid=880"